Here's how we work in Mislata: first we get to know you, and in the end we install your wardrobe
Ordering a made-to-measure wardrobe in Mislata takes eight steps, from a photo and a few measurements to a joint check once the installation is finished. On this page you'll see what happens at each stage, what you decide and which document moves from one phase to the next, so you always know where you are and what comes next.
- 01Ballpark price
- 02Measuring
- 03Design
- 04Final quote
- 05Approval
- 06Manufacture
- 07Installation
- 08Final check
Shape your next wardrobe.
Try out the measurements, plan the interior layout and choose your finishes. See your idea take shape and share it with us so we can prepare your quote.
Send us your configuration with your measurements and we'll give you a guide price within 24 hours, free of charge. The measuring visit at your home comes afterwards.
The eight stages of your order
- 01By WhatsApp
Guide price
Tell us what you'd like and send photos, some approximate measurements and your address in Mislata. We'll reply with a guide price, subject to the measuring visit that follows.
- 02€50 if you don't order
Measuring visit
We'll suggest an appointment at your home in Mislata to assess the space and the access. The cost is €50 if you don't go ahead with us, and it's waived entirely if you do.
- 03Depends on the project
Design and plans, if needed
Once we've measured up in Mislata we move on to manufacturing, and the proposal sets out the terms we've agreed.
- 04In writing
Final quote
Once you've approved the measurements, we'll give you an itemised quote in Mislata covering the interior layout, materials, fittings, installation and the final price.
- 05Agreed deposit
Approval and deposit
First comes your approval; then, with the initial payment agreed, your order in Mislata gets under way.
- 06Allow 2 to 3 weeks on average, from the date of the first payment
Manufacturing
Your approved design is our guide for making the furniture; we then pack it securely to take it to Mislata and fit it.
- 07At your home
Installation
For your home in Mislata, we take care of delivering, fitting and adjusting the furniture, including the adjustment of doors, fronts and finishing touches.
- 08In writing
Walk-through with you
In Mislata we check every door, every finish and how the whole unit works, and we note down on paper any adjustments still outstanding.
Stage 01
What we need for an initial assessment
- —What you want your wardrobe to do: fitted, sliding doors, walk-in? Or perhaps you haven't decided yet
- —Neighbourhood or town
- —Round the three measurements of the recess to the nearest cm: width, depth and height
- —Share photos of the recess with us: an overall shot and one of each side
- —Make a list of what you'll be storing: dresses and suits on the rail, T-shirts on shelves, shoes, suitcases
- —Any preferences you've formed about the look of the doors and the material, if you have any
No drawing or exact measurements needed.
Stage 02
What we check when we come to measure
- —Width and height at several points, to spot uneven walls or ceilings
- —Floor level and skirting board
- —Switches and sockets, but also radiators, windows or beams
- —A clear strip of floor in front of the wardrobe for opening the doors
- —In Mislata we look at how the pieces will get to your door: through the entrance hall, up the stairs or by lift
Stages 05–08
Approval and installation day
How approval works
After the final measuring visit in Mislata, we finalise the design of the interior, doors, materials and fittings with you. The detailed quote includes every decision. Once you confirm it and pay the deposit, we start manufacturing.
What you prepare
In Mislata we ask for an empty space with clear access and with the floor and walls already finished. If sockets need moving or partition walls need knocking down, that work is sorted before we come.
What we do
We fit the wardrobe, adjust it properly and go over it with you in Mislata, and any outstanding finishing touches are put in writing. If you need us to take away the piece of furniture it replaces, this will be stated in the quote.
Step one: photos and measurements for a guide price
You don't need to go anywhere to start ordering a made-to-measure wardrobe in Mislata. It all begins with whatever you have to hand: a photo of the wall, the approximate width, height and depth, and an idea of what you want to store. You can send it by WhatsApp, through the quote form or by preparing your design in the configurator. The team reviews it and comes back to you with a ballpark figure. It's a first reference to see whether the project fits your idea, not a fixed price.

Latest work by SI, ARMARIO
@si.armario
Made-to-measure wardrobes and walk-in wardrobes
Latest posts
Second step: the measuring visit at your home in Mislata
The visit to your home in Mislata is the first face-to-face stage. If the initial guidance suits you, the measuring visit is arranged. We check that the walls are plumb, whether the floor is level, where the sockets, radiators or beams are, and how the pieces will get in. The visit costs €50 if you end up not placing an order, and it is free if you do. The real measurements are used to correct the approximate ones, and sometimes details come to light that change the design.
Have you already measured the space?
A photo of the corner and some rough measurements, sent by chat, are enough for us to give you initial guidance in Mislata.
Third step: the plan, when it's needed
Not every wardrobe needs a detailed plan, but walk-in wardrobes, corners and sloping ceilings almost always do. In that case, a drawing is prepared with measurements, interior layout and door system, and we go through it with you. This is where things can be changed at no manufacturing cost: moving a rail, adding a drawer, raising a shelf. Once you give the go-ahead, the drawing becomes the reference for your order.
Step four: the final written quote
After measuring up, the final quote is drawn up. It details the measurements, the materials for the carcass and the doors, the fittings, accessories, transport, installation and anything that is not included. If there is any additional work, such as removing an old wardrobe or adjusting a skirting board, it appears separately so you can compare it with other proposals. Take your time reading it and ask about anything you don't understand before you decide.
Step five: approval and deposit
Once you accept the proposal, the order is confirmed and a deposit is agreed. From then on, design changes are recorded in writing, because the materials are already being cut. It's best to decide on the handles, colour and interior layout beforehand; changing the finish at this stage means recalculating and may move the date. What is paid, when and how much is set out in the document you sign.

Ask us to come and measure up in Mislata
- 01Give us your name and the part of Mislata you live in.
- 02We'll ask you on WhatsApp which date you prefer and confirm it straight away.
- 03Confirming your order means the measuring visit is free of charge; otherwise it's €50.
Sixth step: manufacturing and installation date
Manufacturing takes two to three weeks on average from confirmation. The installation is coordinated separately, and the date is agreed with you according to your availability and that of the installation team. When your order is almost ready, you'll get a message to set the day. If your residents' association requires working hours or a lift booking, this is the time to let us know.
Seventh step: getting your home ready
In flats in Mislata with a narrow staircase, this preparation matters even more. Before installation, it's best to clear the wall, empty the old wardrobe if there is one and protect the floor of the hallway the pieces will go through. Check that access to the building entrance and the stairs is clear. If you have pets or small children, it's better to arrange somewhere for them to be for a few hours. With the area prepared, the installation is quicker and causes less disruption.
Step eight: joint final check
The work in Mislata is always wrapped up with you present. When we finish, we go over the wardrobe together: doors that slide or close properly, shelf levels, alignment of the doors, any knocks or scuffs. If anything isn't as agreed, it's noted there and then, along with how and when it will be put right. Keep the signed quote and the photos of the finished result, as they'll be useful if you need to raise anything later on. For everyday upkeep, our wardrobe care page has tips for each finish.
Questions
What people in Mislata looking for a new wardrobe usually want to know
Every result we show comes from the same team. Find out what SI, ARMARIO is like.
Can I treat the order as settled once I have the first figure?
No. It's a guide based on what you send. The final price comes in writing after we measure up at your home.
When are the materials and interior layout finalised?
When you review the final quote and, if there's a plan, the drawing. Once both are agreed and the deposit is settled, the order goes into manufacturing.
I've already approved the design and I regret one detail. What do I do?
The change is looked into and noted in writing. Depending on how far along the order is, it may affect the price or the date, and we'll tell you before applying it.
In Mislata, once the installation is finished, what do we check with you?
Door operation, levelling, interior, finishes and cleaning. Any outstanding detail is noted down with a plan to resolve it.
Shall we start with step one?
If you live in Mislata, getting started is simple: send us three measurements and a photo on WhatsApp. A photo from your phone works perfectly well.

